Availability: | |
---|---|
Quantity: | |
G01.6
Suitable for inert and corrosive liquid and gaseous media
Support CIP/SIP
Pasteurized
Valve body and diaphragm are available in a variety of materials
Technical Parameters: | ||||||||
Operation | Plastic piston actuator,with position indication | |||||||
DN | DN15-DN50 | |||||||
Body | one-chaneel body,T-shaped body,tank bottom type body,multi-channel body | |||||||
Body Material | ASTM A351:CF3M | ASTM A182:F316L,904L 2205 2507 | ||||||
ASTM B564:C276 C22 | GB/T 2965 TA2 TA10 | |||||||
Cap and Core Material | ASTM A351 CF8 | |||||||
Connection | Welded ,Clamped & Flange | |||||||
Operation Pressure | DN15-DN50 PN8bar | |||||||
Operation Temperature | Dependent on diaphragm materials | |||||||
Diaphragm Material | EPDM+PTFE separate type:temperature range -10 to 135℃;steam sterillization at 150℃ with no time duration limited | |||||||
EPDM+PTFE compound type:temperature range-10 to 100℃;steam sterillization at 135℃ with every cycle reaching 60min | ||||||||
EPDM type:temperature range -10 to 100℃;steam sterillization at 135℃ with every cycle reaching 60min | ||||||||
Medium-contacting inner surface roughness :≤Ra0.4㎛ ≤0.25㎛ | ||||||||
Failure Position:when air supply is cut off,the valve is closed at FC postion. | ||||||||
Pneumatic Connector:DN15-50 G1/8-6mm DN45-100,G1/4-8mm plastic connector | ||||||||
Action Type:pneumatic,air pressure 5-8bar |
Suitable for inert and corrosive liquid and gaseous media
Support CIP/SIP
Pasteurized
Valve body and diaphragm are available in a variety of materials
Technical Parameters: | ||||||||
Operation | Plastic piston actuator,with position indication | |||||||
DN | DN15-DN50 | |||||||
Body | one-chaneel body,T-shaped body,tank bottom type body,multi-channel body | |||||||
Body Material | ASTM A351:CF3M | ASTM A182:F316L,904L 2205 2507 | ||||||
ASTM B564:C276 C22 | GB/T 2965 TA2 TA10 | |||||||
Cap and Core Material | ASTM A351 CF8 | |||||||
Connection | Welded ,Clamped & Flange | |||||||
Operation Pressure | DN15-DN50 PN8bar | |||||||
Operation Temperature | Dependent on diaphragm materials | |||||||
Diaphragm Material | EPDM+PTFE separate type:temperature range -10 to 135℃;steam sterillization at 150℃ with no time duration limited | |||||||
EPDM+PTFE compound type:temperature range-10 to 100℃;steam sterillization at 135℃ with every cycle reaching 60min | ||||||||
EPDM type:temperature range -10 to 100℃;steam sterillization at 135℃ with every cycle reaching 60min | ||||||||
Medium-contacting inner surface roughness :≤Ra0.4㎛ ≤0.25㎛ | ||||||||
Failure Position:when air supply is cut off,the valve is closed at FC postion. | ||||||||
Pneumatic Connector:DN15-50 G1/8-6mm DN45-100,G1/4-8mm plastic connector | ||||||||
Action Type:pneumatic,air pressure 5-8bar |
SIZE | A | B×T | D | H | ||||
DIN | DIN 11850-2 | ISO/SMS | 3A/BPE | |||||
DN15 | 3/4" | 108 | 18×1.5 | 19×1.5 | 19.05×1.5 | 19.05×1.65 | 90 | 125 |
DN20 | / | 118 | 22×1.5 | 23×1.5 | / | / | 90 | 125 |
DN25 | 1" | 127 | 28×1.5 | 29×1.5 | 25.4×1.5 | 25.4×1.65 | 126 | 160 |
DN32 | 1 1/4" | 146 | 34×1.5 | 35×1.5 | 31.8×1.5 | 31.8×1.65 | 150 | 190 |
DN40 | 1 1/2" | 160 | 40×1.5 | 41×1.5 | 38.1×1.5 | 38.1×1.65 | 150 | 190 |
DN50 | 2" | 190 | 52×1.5 | 53×1.5 | 50.8×1.5 | 50.8×1.65 | 150 | 190 |
SIZE | A | B×T | D | H | ||||
DIN | DIN 11850-2 | ISO/SMS | 3A/BPE | |||||
DN15 | 3/4" | 108 | 18×1.5 | 19×1.5 | 19.05×1.5 | 19.05×1.65 | 90 | 125 |
DN20 | / | 118 | 22×1.5 | 23×1.5 | / | / | 90 | 125 |
DN25 | 1" | 127 | 28×1.5 | 29×1.5 | 25.4×1.5 | 25.4×1.65 | 126 | 160 |
DN32 | 1 1/4" | 146 | 34×1.5 | 35×1.5 | 31.8×1.5 | 31.8×1.65 | 150 | 190 |
DN40 | 1 1/2" | 160 | 40×1.5 | 41×1.5 | 38.1×1.5 | 38.1×1.65 | 150 | 190 |
DN50 | 2" | 190 | 52×1.5 | 53×1.5 | 50.8×1.5 | 50.8×1.65 | 150 | 190 |